Reasons You’re Struggling With Low Shower Pressure In Bankers Hill San Diego
Plumbing fixtures can be a pain to deal with, but low shower pressure is one issue you shouldn’t have to put up with. Whether your water pressure is too low to get the job done or you’re dealing with a trickle instead of a stream, there are several potential causes for your struggles. Here are some reasons why you might be struggling with low shower pressure:
The Water Shut-Off Valve Isn’t Fully Open
If the water shut-off valve feeding your shower isn’t fully open, that could be the reason for your struggles. Check to see if the handle is in line with the pipe or if it’s turned too far in either direction – it should be in the middle for proper functionality.
There Could Be A Leak In The Pipes
Leaks are one of the most common causes of low water pressure. If there’s a hole or crack somewhere in your pipes, that could be why water isn’t making it to your showerhead with enough force. Check all the exposed pipes in your bathroom for any signs of leaks and have them repaired as soon as possible.
The Aerator On Your Showerhead Might Be Clogged
The aerator is responsible for mixing air and water as it comes out of your showerhead, and if it’s clogged, that could be why you’re not getting enough pressure. Remove the aerator and clean it out with a toothbrush – you might be surprised at how much debris has built up over time.
The Water Pressure Regulator Could Be Set Too Low
If your home has a water pressure regulator, it could be set too low, resulting in low water pressure in your shower. Check the dial to see where it’s set and adjust as necessary – you might need a professional to help you with this one.
Your Pipes Could Be Too Small
Pipe size is an important factor when it comes to water pressure. If your pipes are too small, they won’t be able to handle the amount of water flow needed to provide adequate pressure in your shower. This is a problem you’ll need a professional to help you with, so call a plumber if you suspect your pipes might be too small.
There Could Be Sediment Build-Up In Your Pipes
Sediment can build up in your pipes over time and cause all sorts of problems, including low water pressure. If you have an older home, it’s especially important to have your pipes cleaned out on a regular basis to prevent this from becoming an issue.
The Water Heater Could Be Set Too Low
If your water heater is set too low, that could also lead to low water pressure in your shower. Check the temperature setting and make sure it’s set to at least 120 degrees Fahrenheit – anything lower than that could be the culprit.
Conclusion
If you’re struggling with low water pressure in your shower, there are a number of potential causes. Check things like the water shut-off valve, the aerator, and the water heater to see if they might be to blame. If all else fails, call a professional plumber to take a look and diagnose the problem. For more information, contact Plumber Bankers Hill San Diego at (619) 432-4377.
